mail us  |  mail this page

contact us
training  | 
tech stuff  | 

BIND 9 Support

Chapter 8. DNS Resource Records (RRs)

DNS resource records (RRs) describe the characteristics of a zone (or domain) and have a binary or wire-format, which is used in queries and responses, and a text format used in zone files and which is described in this chapter.


  1. Zone File Format
  2. Zone File Directives ($ORIGIN, $TTL, $GENERATE)
  3. DNS Generic Record Formats
  4. Resource Record (RR) Types

Zone File Format

A DNS zone file is constructed using Resource Records (RRs) and Directives. The text representation of these records are stored in zone files.

Zone file example

; zone file for
$TTL 2d    ; 172800 secs default TTL for zone
@             IN      SOA (
                        2003080800 ; se = serial number
                        12h        ; ref = refresh
                        15m        ; ret = update retry
                        3w         ; ex = expiry
                        3h         ; min = minimum
              IN      NS
              IN      MX  10
joe           IN      A
www           IN      CNAME   joe 

The above example shows a very simple but fairly normal zone file. The following notes apply to zone files:

  1. Zone files consist of Comments, Directives and Resource Records
  2. Comments start with ';' (semicolon) and are assumed to continue to the end of the line. Comments can occupy a whole line or part of a line as shown in the above example.
  3. Directives start with '$' and are standardized - $ORIGIN and $INCLUDE (defined in RFC 1035) and $TTL (defined in RFC 2308). BIND additionally provides the non-standard $GENERATE directive.
  4. There are a number of Resource Record (RR) types defined in RFC 1035 and augmented by subsequent RFCs.
  5. The $TTL directive should be present and appear before the first RR (RFC 2308 implemented in BIND 9).
  6. The first Resource Record must be the SOA (Start of Authority) record. The generic format is described below.

up icon

DNS Generic Record Format

Resource Records have two representations. A textual format described in this chapter and a binary or wire-format described in Chapter 15.

The textual format has the following generic form:

owner-name  ttl  class  type  type-specific-data


owner-name The owner-name (or label) of the node in the zone file to which this record belongs. Sometimes referred to as the left-hand name to differentiate it from any name that may appear in the type-specific-data (such as for NS or MX RRs) which is sometimes, surprisingly, called the right-hand name or the target-name. The owner-name field may also take one of the following values:
; replace with the current value of $ORIGIN
; blank/space or tab in which case the last
; owner-name used or the value of $ORIGIN 
; (or its default value) is substituted
ttl 32 bit value. The Time to Live in seconds (range is 1 to 2147483647) and indicates how long the RR may be cached. The value zero indicates the data should not be cached.
class A 16 bit value which defines the protocol family or an instance of the protocol. The normal value is IN = Internet protocol (other values are HS and CH both historic MIT protocols).
types The resource record type which determines the value(s) of the type-specific-data field. Type takes one of the values below.
type-specific-data Data content of each record is defined by the type and class values.

The generic binary or wire-format is:

name  ttl class type rdlen rdata

The binary format is described in chapter 15 RR format

up icon

DNS Resource Record (RR) Types

This is an incomplete list but does consist of the main RR types used in forward and reverse map zone together with links to other RR types that are useful, fun, complex or have interesting names. A full list of DNS Resource Record (RR) types may be obtained from IANA DNS Parameters.

RR Value RFC Description
A 1 RFC 1035 IPv4 Address record. An IPv4 address for a host.
AAAA 28 RFC 3596 IPv6 Address record. An IPv6 address for a host. Current IETF recommendation for IPv6 forward-mapped zones.
A6 38 RFC 6563 Obsolete. AAAA is the recommended IPv6 address record. Historical status.
AFSDB 18 RFC 1183 Location of AFS servers. Experimental - special apps only.
CNAME 5 RFC 1035 Canonical Name. An alias name for a host. Causes redirection for a single RR at the owner-name.
DNAME 39 RFC 6672 Redirection in DNS. Like CNAME but affects all RRs below the address space of owner-name.
DNSKEY 48 RFC 4034 DNSSEC. DNS public key RR.
DS 43 RFC 4034 DNSSEC. Delegated Signer RR.
EUI48 108 RFC 7043 Method of storing EUI (Extended Unique Identifier) 48-bit addresses in the DNS. EUI-48 addresses are used by IEEE defined networks such as Ethernet, Bluetooth and many others. Due to security concerns (discovery of local configuration details that may be used to mount DDoS attacks) it is recommended that EUI48 address are stored only in private namespace DNS. Supported from BIND 9.10+.
EUI64 109 RFC 7043 Method of storing EUI (Extended Unique Identifier) 64-bit addresses in the DNS. EUI-64 addresses are used by IEEE defined networks such as Firewire, 802.15 (WPAN) and others. It is also used by IPv6 as the low order 64 bits of the address in stateless configurations. Due to security concerns (discovery of local configuration details that may be used to mount DDoS attacks) it is recommended that EUI64 address are stored only in private namespace DNS. Supported from BIND 9.10+.
HINFO 13 RFC 1035 Host Information - optional text data about a host.
ISDN 20 RFC 1183 ISDN address. Experimental = special applications only.
KEY 25 RFC 2535 Public key associated with a DNS name.
LOC 29 RFC 1876 Stores GPS data. Experimental - security considerations have mitigated usage.
MX 15 RFC 1035 Mail Exchanger. A preference value and the host name for a mail server/exchanger that will service this zone. RFC 974 defines valid names.
NAPTR 35 RFC 3403 Naming Authority Pointer Record. Gross misnomer. General purpose definition of rule set to be used by applications for Dynamic Delegation Discovery System (DDDS), for example, VoIP or ENUM. Complex but interesting RR.
NS 2 RFC 1035 Name Server. Defines the authoritative name server(s) for the domain (defined by the SOA record) or the subdomain.
NSEC 47 RFC 4034 DNSSEC. Next Secure record. Ssed to provide proof of non-existence of a name.
NXT 30 DNSSEC Next Domain record type. Obsolete use NSEC.
PTR 12 RFC 1035 IP address (IPv4 or IPv6) to host. Used in reverse maps.
RP 17 RFC 1183 Information about responsible person. Experimental - special apps only.
RRSIG 46 RFC 4034 DNSSEC. Signed RRset.
RT 21 RFC 1183 Through-route binding. Experimental - special apps only.
SIG 24 RFC 2535 DNSSEC. Obsolete use RRSIG. SIG(0) is synthesised as a special meta RR in DDNS and zone transfer security.
SOA 6 RFC 1035 Start of Authority. Defines the zone name, an e-mail contact and various time and refresh values applicable to the zone.
SPF 99 RFC 4408 The Sender Policy Framework (v1). RFC 7208 deprecated the use of the SPF RR. The TXT RR is now the only method used to define an SPF configuration.
SRV 33 RFC 2872 Defines services available in the zone, for example, ldap, http, sip etc.. Allows for discovery of domain servers providing specific services.
TXT 16 RFC 1035 Text information associated with a name. An SPF record should be defined using a TXT record. DKIM (RFC 4871 also makes use of the TXT RR for authenticaing email. Related: How to define DKIM/ADSP RRs.
URI 256 RFC 7553 An alternative to the SRV record whereby the full URI string is returned for the required service. Unlike the SRV RR where the final URI string must be assembled from a mixture of search and result strings.
WKS 11 RFC 1035 Well Known Services. Deprecated in favour of SRV.
X25 19 RFC 1183 X.25 address. Experimental - special apps only.

Value is the decimal value of the RR type in binary or wire-format.

DNS Zone File Directives

Directives start with '$' and are standardized - $ORIGIN and $INCLUDE (defined in RFC 1035) and $TTL (defined in RFC 2308). BIND additionally provides the non-standard $GENERATE directive.

Directive Description
$INCLUDE Includes the defined file in-line.
$ORIGIN Defines the base name (aka label) to be used for 'unqualified' name substitution.
$TTL Defines the default Resource Record TTL value, used if no TTL is defined in a resource record.

up icon

Problems, comments, suggestions, corrections (including broken links) or something to add? Please take the time from a busy life to 'mail us' (at top of screen), the webmaster (below) or info-support at zytrax. You will have a warm inner glow for the rest of the day.

Pro DNS and BIND by Ron Aitchison


tech info
guides home
dns articles
1 objectives
big picture
2 concepts
3 reverse map
4 dns types
5 install bind
6 samples
7 named.conf
8 zone records
9 howtos
10 tools
11 trouble
12 bind api's
13 dns security
bits & bytes
15 messages
notes & tips
registration FAQ
dns resources
dns rfcs
change log

Creative Commons License
This work is licensed under a Creative Commons License.

If you are happy it's OK - but your browser is giving a less than optimal experience on our site. You could, at no charge, upgrade to a W3C STANDARDS COMPLIANT browser such as Firefox




Icons made by Icomoon from is licensed by CC 3.0 BY
share page via facebook tweet this page


email us Send to a friend feature print this page Display full width page Decrease font size Increase font size



Debian Linux


GNU-Free SW Foundation


Open Source Initiative
Creative Commons


Ibiblio - Library
Open Book Project
Open Directory


CSS Technology SPF Record Conformant Domain
Copyright © 1994 - 2024 ZyTrax, Inc.
All rights reserved. Legal and Privacy
site by zytrax
hosted by
web-master at zytrax
Page modified: February 01 2022.